生态护坡护岸模具的生产过程就是需要将提前准备好的水泥或者是混凝土进行搅拌，在搅拌的过程中需要经常加入清水，保证材料搅拌到泥浆的状态，但是需要注意的就是清水的比例，不能够让泥浆的搅拌过于稀释，之后在将搅拌好的泥浆浇筑到生态护坡护岸模具中进行震动，震动的处理主要就是需要将泥浆中的气泡排干净，气泡的存在不仅仅会影响到整块的护坡砖硬度的问题，如果气泡凝固在表面位置的话也会造成护坡砖预制件的美观性下降，出现其中一个问题的话，这个护坡砖预制件就不能够在工程中正常使用了，震动要等到里面的泥浆达到一定的程度再去进行晾晒，大多数的拆模都是需要将生态护坡护岸模具拆开，然后再去取出制作好的护坡砖预制件才可以，因为该种模具是能够拆卸的，所以制作出来的护坡砖会更加的完整光滑，可以大批量的在工程中进行使用操作，而且生态护坡护岸模具的拼接和拆卸式需要经过螺栓和其他零件的配合，这样能够保证模具的密封性，不会在生产的时候出现漏浆的意外情况，影响到模具的正常生产处理。

he production process of ecological revetment and revetment mould is to mix the cement or concrete prepared in advance. During the mixing process, clear water is often added to ensure that the materials are mixed to the state of slurry. However, it is necessary to pay attention to the proportion of clear water, which can not make the slurry too diluted. After that, the mixed slurry is poured into the ecological revetment and revetment mould The treatment of vibration is mainly to remove the bubbles in the mud. The existence of bubbles will not only affect the hardness of the whole slope protection brick, but also cause the beauty of the prefabricated parts of the slope protection brick to decline if the bubbles solidify on the surface. If one of the problems occurs, the prefabricated parts of the slope protection brick cannot be used normally in the project. Vibration It is necessary to wait until the mud inside reaches a certain degree to air and dry. Most of the formwork removal needs to take apart the ecological revetment and revetment mould, and then take out the prefabricated parts of the manufactured revetment bricks. Because this kind of mould can be removed, the manufactured revetment bricks will be more complete and smooth, and can be used in large quantities in the project The splicing and disassembling of the ecological revetment and revetment mould need to be matched by bolts and other parts, so as to ensure the sealing of the mould, avoid the unexpected situation of slurry leakage during production, and affect the normal production and processing of the mould.