模具中浇筑泥浆进行生产的话，整个的生产时间是非常短的，同样在有限的时间之内平铺式框格护坡模具是能循环使用的，不用担心模具使用不方便的问题，那么我们在进行加工的过程中，需要做到的就是按照科学的生产方式进行加工处理，因为只有这样才是能够保证整个预制件的生产完整。之后在加工的时候震动的处理时非常重要的，因为泥浆在混合搅拌的过程中会接触到大量的空气，同时也会产生大量的气泡，如果这些的气泡不能够顺利的排出去，那么会让生产出来的护坡砖预制件，在使用的时候硬度和强度达不到合格的标准，并且在外观上还会有着大量的空洞。所以平铺式框格护坡模具的各个生产环节是需要严格控制的，首先来说通过模具生产的预制件他需要达到三点，就是硬度、美观度和抗压性，这三点是比较重要的，因为预制件需要在户外长时间的进行安放，如果出现预制件不合格的问题，那么整个工程就无法在进行下去了，同样对于平铺式框格护坡模具来说也是一种磨损和伤害。

If we pour mud into the mold for production, the whole production time is very short. Similarly, the flat frame slope protection mold can be recycled in a limited time, so we don't need to worry about the inconvenient use of the mold. So in the process of processing, what we need to do is to process according to the scientific production method, because only in this way can we Ensure the complete production of the whole prefabricated parts. After that, it is very important to deal with the vibration during the processing, because the mud will contact with a lot of air in the mixing process and generate a lot of bubbles at the same time. If these bubbles cannot be discharged smoothly, then the hardness and strength of the pre-made parts of the produced slope protection bricks will not reach the qualified standard when they are used, and the appearance will also There are a lot of holes. Therefore, each production link of the flat frame slope protection mold needs to be strictly controlled. First of all, the prefabricated parts produced through the mold need to achieve three points, namely, hardness, aesthetics and compression resistance. These three points are relatively important, because the prefabricated parts need to be placed outdoors for a long time. If the prefabricated parts fail to meet the requirements, the whole project will not be in progress Going on, it is also a kind of wear and damage for the flat frame slope protection mold.